Micro Air Ambient Air Cleaners
Get a Quote
Dust, Smoke & Fume Systems Brochure
Ambient Air Cleaners are designed to capture airborne pollutants and keep plant air below OSHA and NIOSH PEL limits. This can be a very cost effective way to provide, clean safe air to plant employees, while eliminating the need to exhaust expensive heated or cooled air outside. Ambient cleaners use ductless air movement to capture pollutants when source capture is not possible, or as secondary means to help contain residual air contaminants.
MXT Series
Get a Quote
The MXT Series of ambient air cleaners are our best selling and most economical solution when source capture is not possible. Dirty air is drawn through, up to three stages of filtration, on both ends of the cabinet and then exhausted out the front. Creating a T-style pattern of air movement. These units work well for dust, smoke, mist, and fumes.
MXT3500
Get a QuoteMXT3500 dual inlet design draws in contaminated air, passes through filtration and exits the through the front of the unit. Work very well in a push/pull configuration with the directional vents.
o Up to 3,650 CFM
o 120V single phase
o Ceiling, wall, or floor stand mount
MXT5000
Get a QuoteThe MXT5000 draws polluted air through BOTH ends through filtration & exit cleaned air through the front of the unit. Unit has multiple ways to hang and can be vertical or horizontal dual configuration.
o Up to 5,400 CFM
o 230V or 460V
o Horizontal or Vertical configurations
o Ceiling, wall, or floor stand mount
MXT7000
Get a QuoteThe MXT7000 draws polluted air through BOTH ends through filtration & exit cleaned air through the front of the unit. Unit has multiple ways to hang and can be vertical or horizontal dual configuration.
o Up to 7,500 CFM
o 230V or 460V
o Horizontal or Vertical configurations
o Ceiling, wall, or floor stand mount
MX Series
Get a Quote
One of our most versatile product offerings the MX series can be used in multiple applications like dust, smoke, mist, or odors. The larger units can be used as ambient or ducted to a source capture process. With up to four stage filtration, including optional HEPA or RCM (refillable carbon modules), the MX series draws contaminated air through one end and exhausts it out the other.
MX1800
Get a QuoteMX1800 offers ambient dual stage filtration in ductless design that is ready for plug and play. Simply mount it and plug it in. Unit is very quiet and is standard with a high and low speed control operating up to 1,800 CFM. Can be used for a number of applications. Contaminated air is drawn through one end, passes through filtration, and exits out the opposite end.
o Up to 1,800 CFM
o 120V single phase
o 2 stage filtration ambient dry dust only
o Ceiling or wall mount
MX3510
Get a QuoteMX3510 is extremely versatile as it can be configured for ambient dust, smoke, or oil mist. This ambient can also be equipped with HEPA or RCM (refillable carbon module). This unit can filter air up to 3500 CFM depending on filter line up in unit. Filtered air can be set up with straight or side exhaust.
o Can be con figured for ambient dust, fume, odor, mist or source capture
o Up to 3,500 CFM
o 1.5 HP 120V or 3 HP 230/460V
o Multiple filter combinations available
o Carbon and HEPA modules available
o Ceiling or wall mount
MX6000
Get a QuoteMX6000 is our largest bag filter design air cleaner. The MX6000 can be used as an ambient cleaner, or ducted to a source capture process. With many filter options, the MX6000 can filter smoke, dust, oil mist, & odors.
o Can be con figured for ambient dust, fume, odor, mist or source capture
o 7.5 HP motor can be 230V or 460V
o Up to 6,000 CFM
o 7.5 HP 230/460V
o Multiple filter combinations available
o Carbon and HEPA modules available
o Ceiling or wall mount
MC3000
Get a QuoteMC3000 is a cartridge style ambient collector. The MC3000 can be used as an ambient or source capture collector. An optional ducted inlet allows to be connected directly to a machine, or several source capture arms. Micro Air’s Roto-Pulse® filter cleaning technology prolongs the life of your filters and improves performance.
o Up to 3,000 CFM
o 5HP or 7.5HP 230/460V
o Aluminum mesh pre-filter
o Carbon and HEPA after-filter modules available
o Ceiling or wall mount
MT1251/MT1252
Get a QuoteThe smallest ambient we offer. The MT Series can be used for removing dust or odor causing air impurities. Most commonly used in small non-industrial applications. The MT1252 can be mounted above ceiling and ducted with optional inlets.
o Up to 1,000 CFM
o 120V single phase
o Carbon and/or HEPA filtration
o Below or Above ceiling mount